# Connect AutoCAD

Connect AutoCAD to inspect your open drawing, draw and edit geometry through AutoCAD's automation interface, and capture the drawing window. No separate plug-in is required.

## Before you begin

Use a Windows PC with full AutoCAD, or an AutoCAD-based toolset, installed and licensed. AutoCAD LT is not supported because it has no automation interface. Open the drawing you want to work on. For your first connection check, use a copy.

Keep one AutoCAD session open. If several are open, Adam asks you to close the others so it never edits the wrong drawing.

## Connect

**Connect your computer**
In Adam, open **Integrations > AutoCAD** and follow [Adam Desktop setup](/integrations/desktop-connector#pair-a-workstation). If this computer is already paired, use the existing connection.
**Open your drawing**
Keep AutoCAD and Adam Desktop running on the same Windows PC, under the same Windows user, with the drawing you want to work on open.
**Check the open drawing**
Once connected, ask Adam to inspect the drawing without making changes.

```text
Inspect my open AutoCAD drawing without changing it. Report its name, the AutoCAD version, its drawing units, layers, and what is in model space. Capture the current view. Note anything you cannot inspect.
```

## Work with your drawing

Describe the change you want, including dimensions, units, and layers. Each change Adam makes is one undo step, so a single **UNDO** in AutoCAD reverts it. Check the result before saving.

Finish or cancel any command you are running in AutoCAD before asking Adam to make a change. Adam waits rather than editing under an active command.

## If it does not connect

- **The device is online but AutoCAD is unavailable:** open AutoCAD and a drawing on the paired Windows PC. Run AutoCAD and Adam Desktop as the same Windows user, without "Run as administrator".
- **Adam says AutoCAD LT is open:** AutoCAD LT has no automation interface, so Adam cannot connect to it. Use full AutoCAD or an AutoCAD-based toolset.
- **Adam says AutoCAD is busy:** finish or cancel the current command (press Esc) and close any open dialog.
- **A change stopped partway through:** inspect the drawing before retrying. Use **UNDO** in AutoCAD to revert the partial change.
- **A tool cannot read or change the drawing:** keep the AutoCAD version, the requested operation, and the error for [support](/resources/troubleshooting).

For help with pairing, connection issues, or changing computers, see [Adam Desktop troubleshooting](/integrations/desktop-connector#if-an-application-is-offline).
